Decorations for wc-bowl module collection “Bagno cucciolo”

The WC-bowl module is proposed without or with engraved decoration.

The character for this article are two: the “caterpillar” and the “cones”, and are located on the entire length of the module (as indicated on the drawing here below).

WHY CHOOSING THEM?

• They avoid any masonry


• They enables the use of the existing inlets and drains


• They may be custom-tailored.

Inspectable sanitary module for hanging or standing WC-bowl, and bidet, in HPL, with or without decoration.

Upper cover panel in 10mm HPL, yellow colour.

The optional roll paper holder is available in the following colours: B1, B2, D1, D2, D4, G1, I1, I2, P1, R1, W1, Y1, Y3.

On this module all the WC-bowls of the Collection “BagnoCucciolo” can be installed with the exception of the hanging longer Model B44CAS03.

Please always remember, when ordering, to also purchase the supporting frame.

The soft vinyl profile must be extra requested when ordering and is available in Green or Blue colour (G1, B1).